Cadence Flash F100-5 Installation Guide download pdf (Page 19)

FIVE CHANNEL INPUT MODE

INPUT MODE

SWITCH SET TO 2CH

2 CHANNEL MODE

4 CHANNEL MODE

5 CHANNEL MODE

INPUT MODE

SWITCH SET TO 4CH

INPUT MODE

SWITCH SET TO 5CH

If your head unit has one single pair of RCA

outputs, input them in to the ampliers Channel

1 and 2 input jacks and set the Input Mode Switch

to 2Ch. The ampliers preamp circuitry will

automatically mix all the channels and output will

occur on all 5 channels. There will be Left and Right

balance with constant subwoofer but no Front to

Read Fader Control.

If your head unit has two pairs of RCA outputs,

input Front Left and Front Right in to amplier

Channels 1 and 2 input jacks. Rear Left and Rear

Right in to ampliers Channels 3 and 4 input jacks.

Set the Input Mode Switch to 4Ch. The ampliers

preamp circuitry will automatically mix all the

channels and output will occur on all 5 channels.

There will be Left and Right balance, Front to Rear

Fader with constant subwoofer.

If your head unit has three pairs of RCA outputs,

input Front Left and Front Right in to amplier

Channels 1 and 2 input jacks. Rear Left and Rear

Right in to ampliers Channels 3 and 4 input jacks.

Subwoofer output in to Channel 5. If your head

unit has only a single subwoofer output, use a Y

adaptor to feed both Channel 5 inputs. Set the

Input Mode Switch to 5Ch. The ampliers preamp

circuitry will automatically mix all the channels

and output will occur on all 5 channels. There will

be Left and Right balance, Front to Rear Fader with

independent subwoofer.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Cadence Flash F100-5 Installation Guide Page 19